Eaton EMR-3MP0 - Page 238

Housing Depth (incl. Terminals): 208 mm (8.189 in.)
Material, Housing: Aluminum extruded section
Material, Front Panel: Aluminum / foil front
Mounting Position: Horizontal (±45° around the X-axis must be
permitted)
Weight: approx. 2.4 kg (5.291 lb)
Current and Ground Current Measurement (Card “TI”)
E_F20
0.3 Nm
2.65 lb⋅in
2.0 Nm
17.7 lb⋅in
1.35 Nm
11.9 lb⋅in
Maximum Value:
Recommended:
Fig. 57: Plug-in Connector with Integrated Short-Circuiter (Conventional Current Inputs)
Frequency Range: 50 Hz / 60 Hz ±10%
Terminals: Screw-type terminals with integrated short-
circuiters (contacts)
Screws M4, captive type
Connection Cross Sections: 1 x or 2 x 2.5 mm² (2 x AWG 14) with wire end
ferrule
1 x or 2 x 4.0 mm² (2 x AWG 12) with ring cable
sleeve or cable sleeve
1 x or 2 x 6 mm² (2 x AWG 10) with ring cable
sleeve or cable sleeve
The current measuring board's terminal blocks
may be used as with 2 (double) conductors AWG
10,12,14 otherwise with single conductors only.
238 www.eaton.com EMR-3MP0
10 Technical Data EMR-3MP0