Eaton EMR-3MP0 - Page 75

• “60 Vdc”
• “125 Vdc”
• “250 Vdc”
• “110/120 Vac”
• “230/240 Vac”
If a voltage >80% of the set switching threshold is applied at the digital input, the state
change is recognized (physically “1”). If the voltage is below 40% of the set switching
threshold, the device detects physically “0”.
75www.eaton.comEMR-3MP0
2 Hardware
2.2 EMR-3MP0 – Installation and Wiring