Eaton XC-303 Series - Page 60

3 Commissioning
3.2 USB interface activation for XC-104-… and XC-204-… devices
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 55
▶ Log in and create a password.
The "System configuration" screen will appear.
▶ In the USB section, click on the "Enable USB" toggle switch.
▶ Click on "Apply."
￫
Do not forget to write the password down!
As the first user, you will automatically be set up as the adminis-
trator.
USB
Enable USB Enable USB autostart
Reset changes
Device information
change password
Power management
Reboot
Apply
Enable USB factory reset
Shutdown
Powerfail
Power down resources are in good condition.
Current power fail reserves are 71ms.
Factory reset
Factory reset
Minimal power fail time (ms)
Maximal power fail time (ms)
0
128
Model number
XC-204-C11-003
Serial number
100000001098
Image name
eaton-image
Image version
v1.0.0-rc4
Bootloader version
2020.04.1.0
OS version
v3.2.0.0-rc2
System configuration English
9
10