EBS
Ink-Jet Systems
®
EBS-6100 Printer User's Manual
Paragraph 5 - Examples of How to Operate the Printe
20070529#20.5
101
3) Print the text file called EXDA following the instructions given in section 5.1 How to Print
the First Sample Text File point 8).
NOTE: The current date is increased by 70 days after every overprint has been
made and the new date is printed next.
5.2.4. How to Print Logos
Assumption: the overprint should look like as follows:
1) Define a G
RAPHICS subfile and make a graphical image – a logo.
In the main MENU select the TEXT SERVICE item and then the
CREATE NEW TEXT item.
You are prompted to type in a text-file name. Input a name, e.g. LOGO and confirm.
Type : Graphic
Height : 25
Length : 25
Front dis : 5
Back dist : 5
• Set parameters for the first subfile (the
§ key)
and confirm.
• Press the
« V keys to move to the
graphics processor.
• Now create a graphical image using the appropriate
function keys that are offered by the graphics
processor - see section 4.4.1.2 Opening and
Editing a New Text File paragraph GRAPHICS
PROCESSOR - A Description of Function Keys
and confirm.
NOTE:
If you find it difficult to design a graphical image on
the terminal display, you can make a drawing on
a sheet of squared paper, and then copy it to the
graphics processor - see Fig. 5.2.4.1.
To Next Page
Loading...
