EBS EBS-6100 - Understanding Print Head Status

EBS
Ink-Jet Systems
®
 EBS-6100 Printer User's Manual
 Paragraph 4 - Operating the Printe
r
20070529#20.5
 27
AUX. COMMANDS
1 OPTIONS
5 TIME
A
ND DATE
4 READ ERRORS REPORT
3 CLEAR ERRORS
2 DISPLAY ERRORS
PRINTING
Only some parameters can be modified during
the printing. The settings of others are only
displayed.
If the TEXT SERVICE menu option is protected by a
user password, any modifications to a block of
parameters, change counter and global counter as well
as access to the global counter are allowed only after
the right password has been typed in.
SERVICE
Vert. direct. : UP
Space : 2,0 mm
Text rpt. : 1
Rpt.dist. : 30,0 mm
Direction : LEFT
Height : LARGE
Offset : 1
Offset2 : 1
Counter delta : 1
Row repetit. : 1
Mode : NORMAL
Speed : SLOW
Interleave : STANDARD
Generator : GEN
Resol. dot/cm : 30
Cnv spd m/min : 10,0
6
A
CTIVITY TIME
7 LANGUAGE
8 UNLOCK PROTECTION
B SOFTWARE OPTIONS
3 QUICK STOP
4 PRINTING PARAMETERS
2 START PRINT
1 STOP PRINTING
5 SAVE CURRENT PARAM.
7 SET SHIFT COUNTER
6 SHIFT COUNTER
8 ROWS SPEED
A SET GLOBAL COUNTER
9 GLOBAL COUNTER
C PRINT SWITCH
0 EDIT & PRINT CURRENT TEXT
D DISPLAY PRINTED TEXT
1 SERVICE
5 FAST OFF
4
V
0 ON
3
V
0 OFF
2 CLEAN NOZZLE
6 INK ON
7 INK OFF
8 SOLVENT
9 SET INK STREAM
A STROBOSCOPE
C SERVICE COMMANDS
PASSWORD
This is a special service password that protects
an extended set of service commands.
D OTHERS
B HV
V
ALUE,PHOTO,SHAFT,AirP state
2 INK FILTER CHANGE
1 CONVEYER MEASUREMENTS
3 PRINTER STORAGE PREPARATION
4.3. Print Head Status
The print head operates in the right way, if the ink jet is properly broken into droplets, the
droplets are properly charged and a flow of unused ink droplets falls into the gutter generating