EBS
Ink-Jet Systems
®
EBS-6100 Printer User's Manual
Paragraph 5 - Examples of How to Operate the Printe
20070529#20.5
103
Type : Barcode
Code : EAN-13
Contents : 5007463006216
Height : 25
Elongat.X : 1
Spec.reg. : None
Front dis : 0
Back dist : 0
Signature : YES
Inversion : NO
• Set subfile parameters (the
§ key), input the
numerical value of the bar code (only 12
characters, the 13
th
character is calculated
automatically) and confirm.
If the bar code is acceptable, press the
V
key in order to record the text file in the library
and save it in the memory. Otherwise, press the
§ key again and go on with modifying the bar
code and subfile parameters.
2) Define print parameters following the instructions given in section 5.1 How to Print the
First Sample Text File point 7).
3) Print the text file called BARC following the instructions given in section 5.1 How to Print
the First Sample Text File point 8).
5.2.6. How to Print a Complex Subfile
Assumption: it is 25
th
July 2003 10:34 hours; the text should look like as follows, when
printed:
1) A complex file of this type can be created in three ways (!):
a) create each of the subfiles of your complex file separately and save them with their
own names, then start a new file and link all subfiles into it by their names,
b) create a text file and define all subfiles within it,
c) use a mixed method to create a text file in which some subfiles are defined and the
other are linked by their names.
The mixed method is used in the example. The text files called DATI and LOGO have
already been defined in the sections above and are used in this example (the text files
need to be created in advance to illustrate the methodology properly).
Define two T
EXT - ASCII characters type subfiles, link the graphical image called LOGO
by its name, create three other T
EXT - ASCII characters type subfiles and link the text file
called DATI where special registers are used.
In the main MENU select the TEXT SERVICE item and then the
CREATE NEW TEXT item.
You are prompted to type in a text-file name. Input a name, e.g. ABCD, and confirm.
Type : Text
Char. set : Latin 16x10
Typeface : Normal
Distance : 2
Rotation : None
Spec.reg. : None
• Set parameters for the first subfile (the
§ key)
and confirm.
• Input contents for the first subfile:
EBSInk-JetSystemsGmbH.
• Press the
« ¤ keys to create a new subfile
below the previous one.
To Next Page
Loading...
