EBS EBS-6100 - Page 46

 EBS-6100 Printer User's Manual
 Paragraph 4 - Operating the Printer
EBS
Ink-Jet Systems
®
 44
20070529#20.5
Description Settings
Print beg. - see below,
CONTINUE,
BEG.VALUE,
MIN/MAX
Mode - see below,
Standard,
Special
Beg.value1 - initial setting
5
*),
Min.value1 - minimum setting,
Max.value1 - maximum setting,
Cnt.delta1 - increment,
0 ÷ 4 294 967 295
0 ÷ 4 294 967 295
0 ÷ 4 294 967 295
0 ÷ 255
applies to the first element
of the universal counter
(the main counter)
Beg.value2 - initial setting *),
Min.value2 - minimum setting,
Max.value2 - maximum setting,
Cnt.delta2 - increment,
Cnt.value2 - current setting of the counter; it is
vital for the auxiliary unprintable
counter,
0 ÷ 65 535
0 ÷ 65 535
0 ÷ 65 535
0 ÷ 255
0 ÷ 65 535
applies to the second
element of the universal
counter
(the auxiliary counter)
0 suppress - Indication whether to hide leading
zeros.
If the setting is YES the leading zeros are
replaced with spaces in both elements, and
both elements are moved to the separator.
YES, NO
Spc.Md.max - the number of photo detector
activations for which unchanged settings of the
main counter and auxiliary counter (a
subcounter of the auxiliary counter for the
same prints) are to be printed,
0 ÷ 65 535
Spc.Md.cnt - the setting of the Spc.Md.max
parameter from which the printing is to be
resumed,
0 ÷ 65 535
Pal.countr - the number of packages on a pallet
– it defines “jumps” of the main counter for
successive pallets, so that consecutive
numbering is used during the placing of
packages on pallets.
0 ÷ 65 535
available only for the
following universal counter
setting Mode=Special
5
*) Both elements of the universal can be set to their initial settings in the Standard mode only. In the Special mode the
settings need to be modified by editing the subfile of the universal counter directly.