13
Kraftformer KF 170 PD
2018-05-09 | ECKOLD AG
3.3 Possible misuse
The machine must be installed and serviced only by authorized personnel.
The machine must not be modified or altered in any way without authorization.
The operation and preventive maintenance of the machine as described in the operation
manual must be performed only by authorized and trained personnel.
As a general rule, the machine may be operated in Normal mode only if all safety features are
present, properly installed and fully functional.
The machine may be operated in other operating modes (Maintenance mode) requiring the
removal of certain safety features only while the personnel pays extra attention and if it is
ensured that all safety features are properly replaced and their function checked immediately
after the work has finished.
All problems and damages indicated by the system or detected otherwise must be reported
and eliminated immediately.
None of the conditions defined for the intended use, such as performance data (pressures,
dimensions, weight, etc.) or materials, may be altered.
The machine must not be operated by personnel that does not meet the requirements defined
in this operation manual (see chapter 3.4 „Selecting personnel and personnel qualifications“
on page 13).
Bypassing valves and other control components is prohibited
WARNING
— Personnel who have not been trained, or who have not read the operating
manual, work on/with the product
—> Life-threatening hazards for personnel, injury hazards for personnel, Damage to the
product
•
Owner:
Only assign personnel to work with/on the machine who have been trained
in the tasks of the relevant operating phase and/or have read the operating manual.
Provide training for your personnel for the handling of the machine so that all
instructions in the operating manual are observed. Ensure that the operating manual is
available to your personnel so that they can familiarize themselves with the content.
•
Personnel:
Follow all instructions listed in the operating manual.
3.4 Selecting personnel and personnel qualifications
The owner of the machine (Machine) is responsible for correctly selecting personnel and
qualification of personnel for working on/with the machine.
Fundamental safety instructions
To Next Page
Loading...