Eckold KF 170 PD - Personnel & Setting into Operation

31
Kraftformer KF 170 PD
2018-05-09 | ECKOLD AG
7 Operation
7.1 Required Personnel
Well trained and qualified personnel with the following knowledge must be used:
Instruction and / or reading of the instruction manual, chapter:
03 Fundamental safety instructions, 05 Construction and Operation, 07 Operation,
08 Maintenance
7.2 Setting into operation
The apparatus head (1) is slewable. The apparatus head can be swivelled by approx. 15 degrees after loose-
ning the clamping levers (2) to set it to the most suitable working height.
1
2
WARNING
— Personnel, was not trained or has not read the instructions of the manual, is
working on / with this product
—> Risk of injury to personnel and damage to the product
• Personnel entrusted with work on the machine must have read the operating instructi-
ons and in particular the chapter on safety before beginning work. Reading the instruc-
tions after work has begun is too late. This applies especially to persons working only
occasionally on the machine, e. g. during setting up or maintenance.
iIMPORTANT
Independent of the following directives, the regional safety regulations are valid
for the operation of the machine!
Operation