Eckold KF 170 PD - Damage (Visual Check); Observe Excessively Noises; Check the Tools for Damage; Check the Tools for Secure Fit

Kraftformer KF 170 PD
2018-05-09 | ECKOLD AG 44
8.3.1.2 Damage (visual check)
• Disconnect the air supply.
• Check the product for damage.
In the case of minor damage:
• Inform the maintenance service of your company or the customer service department of
the machine manufacturer.
• Get the damage repaired.
If the tools are damaged:
• Replace the damaged tool.
If the tools are loose:
• Install the loose tool properly.
In the case of damage which affects safety:
• Let interrupted the air supply.
• Ensure that operation with the product is not resumed (e.g. using warning signs).
• Get the damage repaired immediately by the maintenance service of your company, or
through the customer service department of the machine manufacturer.
8.3.1.3 Observe excessively noises
• Pay attention to excessively loud noises which are not part of normal operation.
• Disconnect the air supply.
• Inform the maintenance service of your company or the customer service department of
the machine manufacturer.
• Get the damage repaired.
If you hear excessively loud noises:
8.3.1.4 Check the tools for damage
• Disconnect the air supply.
• Check the tools for visible damage.
8.3.1.5 Check the tools for secure fit
• Disconnect the air supply.
• Check to see if the tools sit securely.
Maintenance