15
Kraftformer KF 170 PD
2018-05-09 | ECKOLD AG
The following dangers exist:
Danger zone 1
— Crushed upper extremities (e.g. fingers, hands, arms)
WARNING
— Reaching into the danger zone during working movements. In the working
range of the ram, in particular between the tools
—> Crushed upper extremities (e.g. fingers, hands, arms)
• Do not reach into danger zone during working movements.
• During working movements, prevent others from reaching into the danger zone
CAUTION
— Sharp edges on component (sheet metal) which is to be processed
—> Cuts to upper extremities
• Always wear protective gloves when processing components on the Kraftformer
Danger zone 2
— Cuts to upper extremities
Danger zone 3
— Damage to vision
WARNING
— Flying splinters while components are being processed, particularly at high
machining forces
—> Damage to vision, injury to personnel
• Always wear eye protection when processing components on the Kraftformer.
Persons in jeopardy
Persons in jeopardy include all those who are wholly or partially located in the hazard area.
Operating personnel
Operating personnel include the following people:
— Personnel who have been assigned with operation, including charging, malfunction
resolution in the work process, disposal of production wastes, care, disposal of operating
materials and auxiliary materials.
— Personnel who have been assigned with maintenance (service, inspection, repair).
— Personnel who have been assigned with transport.
Fundamental safety instructions
To Next Page
Loading...