Ecolab Elados EMP KKS E60 - Installing the Batch Function; Installing the Metering Monitoring

417101774_EMP_KKS_E60_E.doc - 19 - Rev. 8-03.10
7.2.3.4 Installing the batch function
)
HINWEIS
The batch funktion must be activated in menue first.
(see chapter 10.3.15 batch configuration)
According to the requirements, the input of the batch pulse (contact 2+4 or contact 3+4)
must be configured. (see chapter 10.3.15.)
Fig. 7.15
7.2.3.5 Installing the metering monitoring
Fig. 7.16
)
NOTE
The input of the metering monitoring can be configured according to requirements.
(see chapter 10.3.13)