Ecolab Elados EMP KKS E60 - Installing the Stroke Signal Output at 24 V; DC; Installing the Alarm Output at 115;230 V; AC

417101774_EMP_KKS_E60_E.doc - 21 - Rev. 8-03.10
7.2.4.2 Installing the stroke signal output at 24 V / DC
Fig. 7.19
7.2.4.3 Installing the alarm output at 115/230 V / AC
Fig. 7.20
Standard configuration:
closed = empty report container active or error message
Other configuration see chapter 7.2.4.4
(Hardware) and chapter 10.3.9 (software /menu)
WARNING
At 115V/230 V, a simultaneous connection of contact 1/2 (alarm output) and 3/4 (stroke
signal output) is generally not permitted.