417101774_EMP_KKS_E60_E.doc - 45 - Rev. 8-03.10
10.3.13.2 Metering monitoring / Stop pump
The “stop p
ump” function is used to set whether or not the pump should be stopped if a
“metering monitoring alarm” is triggered.
Fig. 10.34
- Pump is not stopped
when a “metering
monitoring alarm”
is triggered. (Default setting)
9 Pump is stopped
when a “metering
monitoring alarm”
is triggered.
10.3.13.3 Metering monitoring / Strokes
The “strokes” option indicates the stroke interval
to be monitored.
Setting range: 0 – 100
Fig. 10.35
Default setting = 10
To Next Page
Loading...
