417101774_EMP_KKS_E60_E.doc - 37 - Rev. 8-03.10
10.3 Configuration
10.3.1 Overview
Fig. 10.14
Configuration of: chapter:
¾ Menu language see 10.3.3
¾ Units see 10.3.4
¾ Code entry see 10.3.5
¾ Startup settings see 10.3.6
¾ Metering lock see 10.3.7
¾ Low-level contact see 10.3.8
¾ Alarm output see 10.3.9
¾ Pulse memory see 10.3.10
¾ Oval gear meter see 10.3.11
¾ Metering controller see 10.3.12
¾ Metering monitoring see 10.3.13
¾ MicroFlow see 10.3.14
This menu item only appears in conjunction with the
MicroFlow metering monitor, which is available as an
accessory, and replaces the menu item “metering
monitoring”.
¾ Batch see 10.3.15
¾ Degas see 10.3.16
10.3.2 “Scrolling the display“
Fig. 10.15
The display possesses a "scroll function", i.e. some menu items are
only shown on the display when the end of the menu is reached on
the display.
Using the symbols ▲ (1) or ▼ (2) on the display, you can see which
direction you can scroll in.
1 = (▲)scroll the display upwards
2 = (▼)scroll the display downwards
10.3.3 Configuration / Language
This is u
sed to select the menu language.
10.3.3.1 Selecting
Fig. 10.16
Default setting = German
To Next Page
Loading...
