Ecolab Elados EMP KKS E60 - Pump Key Definition E60

417101774_EMP_KKS_E60_E.doc - 69 - Rev. 8-03.10
14.1.1 Pump key definition E60
1. Electrical version
E60
• On/Off switch for switching the pump
• mechanical stroke adjustment
• backlit graphical display, 4 control keys
• individual stroke control (each stroke is executed completely)
• metering control via stroke signal output (computed)
or via external metering monitoring system
•
collection of operating and consumption data (computed)
•
calibration function
configurable operation modes:
Internal operation
Setting of metering quantity/metering frequency in:
•
Strokes/min.
•
Percentage
•
Litres/hr (or gallons/hr)
External operation
•
Pulse operation (control via pulses)
-
Pulse multiplication (1 incoming pulse = n metering strokes)
-
Pulse division (n incoming pulses = 1 metering stroke)
•
Standard signal operation (control via external standard signal 0/4 - 20 mA or 20 - 0/4 mA)
•
Batch operation (a preset quantity is metered after being triggered by external enable pulse)
Inputs:
•
low-level monitoring of bundle holder (reserve and empty report)
•
pulse
•
standard signal
•
enabling signal (metering lock)
•
metering monitoring
Outputs:
•
low-level monitoring of bundle holder / fault (reserve and empty report)
•
Fault report
•
stroke signal
E60
PLUS
•
similar to E 60
, but with the addition of a
dongle box
for connecting of oval gear meter OGM
PLUS
(expansion unit for the capture of operating data)
•
display of the currently measured metering quantity and automatic readjustment of pump output
(only in conjunction with an external throughflow monitoring system,
e.g. oval gear meter OGM
PLUS
)
•
automatic calibration function via oval gear meter
•
consumption data monitoring via oval gear meter