Ecolab Elados EMP KKS E60 - Selecting; Display in the Operating Display; Setting

417101774_EMP_KKS_E60_E.doc - 34 - Rev. 8-03.10
10.2.3.1 Selecting
Fig. 10.8
10.2.3.2 Display in the operating display/ Setting
The multiplication and d
ivision factors are configured/adjusted in the operating display. This
can take place while the pump is operating.
Multiplication
Fig. 10.9
Division
Fig. 10.10
NOTE
If the newly set value is not
confirmed within 10
seconds by pressing the
START/STOP key, the
system reverts to the
previously set running
value.