417101774_EMP_KKS_E60_E.doc - 53 - Rev. 8-03.10
10.3.16.2 Degas / Degas strokes
The number of strokes that should be processed during a degassing interval is recoded
under “degas strokes”.
Setting range: 1-100
Fig. 10.51
Default setting = 0
10.3.16.3 Degas / Degas break
The time between two degassing intervals is set under “degas break”.
If a metering request is submitted during this period, this is processed and the Degas
PLUS
break time is reset and restarted.
Setting range
: hours 00 - 23
minutes 00 - 59
total 00.01 - 23.59h
Fig. 10.52
Default setting
= 00:00
To Next Page
Loading...
