Ecolab Elados EMP KKS E60 - Connector Assignments of Slot VIII (5-Terminal) Input for Pulse, Standard Signal Input and Metering Lock; Installing the Pulse Control (Water Meter)

417101774_EMP_KKS_E60_E.doc - 27 - Rev. 8-03.10
8.2.3 Connector assignments of Slot VIII (5-terminal)
input for pulse, standard signal inp
ut and metering lock
Fig. 8.9
1: 5 V supply
2: Input for external pulses
3: Input for metering lock
4: GND
5: Input for standard signal
# Remove the protective cap
# Mount the connector plug according to the connector assignment.
WARNING
Only use a connector plug from our product range!
8.2.3.1 Installing the pulse control (water meter)
Fig. 8.10