Ecolab Elados EMP KKS E60 - Configuration; Unit; Selecting; Configuration; Code

417101774_EMP_KKS_E60_E.doc - 38 - Rev. 8-03.10
10.3.4 Configuration / Unit
If ‘litre’
is selected for the ‘internal’ operation mode (see chapter 10.2.2
), this can be used to
change the display from litres/h to gallons/day (1 gallon = 3,785 litres).
10.3.4.1 Selecting
Fig. 10.17
Default setting = liter
10.3.5 Configuration / Code
With this
setting, a four-digit number combination can be assigned to secure the setting
against unauthorized adjustment.
If ‘code’ has been activated, the four-digit code must be entered before configured values
can be amended or the main menu can be accessed.
10.3.5.1 Selecting
Fig. 10.18
- Code query inactive.
(Default setting)
9 Code query active.
see chapter 10.3.5.2