417101774_EMP_KKS_E60_E.doc - 42 - Rev. 8-03.10
10.3.10.2 Display in the operating display with an active pulse memory
Display in operation Meaning Pos Description
1
Pulse memory active
2
Number of pulses received
3
Set factor
Fig. 10.25
Pulse multiplication
(Example:
10 external pulses
become 20 strokes)
Fig. 10.26
Pulse division
(Example:
10 external pulses
become 20 strokes)
10.3.11 Configuration / Oval gear meter (only E60
PLUS
& OGM or OGM
PLUS
)
The controller function of the EMP E60
PLUS
pump can be enabled using an OGM
PLUS
oval
gear meter.
The oval gear meter function makes it possible to record a “real” value in the operating
data/litre menu item (see chapter 10.5.3
).
NOTE
The oval gear meter can only be activated if the pump is upgraded with a dongle box to the
E60
PLUS
and a “standard“ oval gear meter (see Accessories) is connected.
To activate the Dongle-Box in connection with the oval gear meter, the power supply has
to be switched off and on again! (Unplug power plug or switch the pump off and back on
again!)
The oval gear meter function is automatically activated when an OGM
PLUS
is connected.
10.3.11.1 Selecting
Fig. 10.27
- oval gear meter is inactive.
(Default setting)
9 oval gear meter is active.
To Next Page
Loading...
