Ecolab Elados EMP KKS E60 - Startup; Switching on the Pump; Switching off the Pump; Key Functions

417101774_EMP_KKS_E60_E.doc - 29 - Rev. 8-03.10
9 Startup
9.1 Switching on the pump
Fig. 9.1
2 sec # Press START/STOP key (min. 2 sec.).
9.2 Switching off the pump
Fig. 9.2
5 sec # Press START/STOP key (min. 5 sec.).
9.3 Key functions
Key Description
MENU/EXIT function entry and exiting of the menu levels
(keep keys pressed down together)
(S)
Modify set values upwards
Fig. 9.3
(T)
Modify set values downwards
Fig. 9.4
Start the pump
Stop the pump
Confirmation key (ENTER) for set values
Fig. 9.5
Test function (endurance test)
9.4 Initial startup / Delivery status
In the as-delivered condition, the pump is configured as follows.
Operation mode: Internal
Stroke frequency: 122 strokes/min (max. at 50 Hz) or 146 strokes/min (max. at 60 Hz)
Status: pump in the "OFF" ("Standby" in V 4.0) operating state
)
NOTE
To change the preconfigured factory settings, observe the corresponding menu items in
chapter 10.3 "Configuration".