94
AP Mode is a standard access point in a
wireless network.
AP Controller Mode is the master of an AP
array and controls all other managed APs
(below) using Edimax Pro NMS.
Managed AP mode is an AP which is part of
the AP array and is managed by the
Controller AP.
When you set the operation mode to repeater mode, the AP will
not get an IP address from the router/root AP. You will need to
set your computer’s IP address and use the APs default IP address
to access the UI for the first time, refer to Appendix for more help.
To Next Page
Loading...
Need help?
General
