Edimax CAP1750 User Manual

Edimax Pro NMS
122
Or
Incompatible
NMS Version
System Security).
Access points must use the same version
of Edimax NMS: the managed AP will not
be able to make configurations. Please
use the AP Controller’s firmware upgrade
function (refer to IV-5-7. Firmware
Upgrade).
Orange
Configuring or
Upgrading
Please wait while the Managed AP makes
configurations or while the firmware is
upgrading.
Yellow
Connecting
Please wait while Managed AP is
connecting.
Green
Connected
Managed AP is connected.
Blue
Waiting for
Approval
Managed AP is waiting for approval.
Refer to IV-5-1. Access Point: Auto
Approval. Note: 32 Managed APs are
supported. Additional APs will display this
status until an existing Managed AP is
removed.
Each Managed AP has “Action” icons with the following functions:
1. Disallow
Remove the Managed AP from the AP array and disable connectivity.
1. Edit
Edit various settings for the Managed AP (refer to IV-5-1. Access Point).
2. Blink LED
The Managed AP’s LED will flash temporarily to help identify & locate
access points.
3. Buzzer

Edimax CAP1750 Specifications

General

Brand	Edimax
Model	CAP1750
Category	Wireless Access Point
Language	English