61
Select “WDS with AP” to use WDS with access
point or “WDS Dedicated Mode” to use WDS
and also block communication with regular
wireless clients. When WDS is used, each
access point should be configured with
corresponding MAC addresses, wireless
channel and wireless encryption method.
Displays the MAC address of your access point.
Enter the MAC address for up to four other
WDA devices you wish to connect.
Specify the WDS VLAN mode to “Untagged
Port” or “Tagged Port”.
Specify the WDS VLAN ID when “Untagged
Port” is selected above.
Select whether to use “None” or “AES”
encryption and enter a pre-shared key for AES
with 8-63 alphanumeric characters.
To Next Page
Loading...
Need help?
General
