EMC VNX VG2 - Page 224

EMC VNX VG2/VG8 Gateway Configuration Setup Guide
224
NAS Install Options
EMC CONFIDENTIAL
12. To use the gateway auto-config script, select Yes (see Figure 146 on page 223) and
press Enter.
A confirmation prompt appears.
13. Tab to Ok and press Enter to confirm the gateway auto-config selection.
CAUTION
!
If prompted, do not press C to continue on the Control Station session yet.
The system prompts you to select an auto-config option (Figure 147).
Figure 147 Create system RAID group and LUNs settings
14. To automatically create the RAID group and LUNs, select the Create System
RAID Group and LUNs checkbox.
If you want to manually create the RAID group and control LUNs, clear the
Create System RAID Group and LUNs checkbox.
15. Tab to Ok and press Enter to confirm your selection.
The system prompts you to confirm the auto-config option (Figure 148).
Figure 148 Number of Fibre Channel switches screen
16. Tab to OK and press Enter to confirm your selection.