Emerson X-STREAM XE User Manual

Emerson Process Management GmbH & Co. OHG6-12
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
Calibration Status Single
Cancel!
CalibrStatus Ready
Remaining Time 0 s
Concentration 0.000 ppm
Zero Gas 0.000 ppm
Span Gas 5000.000 ppm
Current Range Range 1
Applied Gas Sample gas
6.2.2.3.3 Calibration Status Single
Press enter in the rst line to cancel any on-
going calibration
Currently measured gas concentration.
Current channel´s calibration gases setup
Range under calibration.
Indicates the currently ongoing procedure
(Purging, Zeroing, Spaning, Ready)
Shows the remaining time for the current
procedure
6.2.2 Control Menu
Control..
...
...
Calibration Status Single..
This menu gives a channel specic status.
Note!
This menu can be opened from several hig-
her-level menus, dependent on which it now
may be necessary to select a component:
Multi-channel unit:
In SELECT COMPONENT select the chan-
nel to be viewed.
Multi-channel unit:
Press
left to enter SELECT COMPONENT,
to view the status for another channel.

Emerson X-STREAM XE Specifications

General

Brand	Emerson
Model	X-STREAM XE
Category	Measuring Instruments
Language	English