Emerson X-STREAM XE - Control Menu

Emerson Process Management GmbH & Co. OHG 6-5
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
6
Software Menus

Data Logger..
Event/Calibration Logger..
Zero Calibration..
Span Calibration..
Advanced Calibration..
Apply Gas..
Lock Menus!
Acknowledgements
Pump 1: Off
Pump 2: Off
Ranges..
6.2.2 Control Menu
Press
enter in this line to lock all menus, for
which "Code" in MENU ACCESS has been
set to On ( 6-32)
6.2.2 Control Menu
Available if the related internal pump is in-
stalled:
Switch internal pump 1 / 2 On or Off.
Note!
These lines do not appear if digital inputs are
used to control the pumps ( 6-71) , or if
no internal pump is available.
Perform zero calibrations 6-6
Perform span calibrations 6-7
Apply gases 6-16
Acknowledge messages 6-17
Set ranges 6-18
Handle data logger data 6-19
Handle event/calibration logger data
6-20
Perform advanced calibrations 6-8
Control..