Emerson X-STREAM XE User Manual

Emerson Process Management GmbH & Co. OHG6-42
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
Start ...
Month: 6
Day: 23
Hour: 10
Minute: 0
Set!
Next 6/23/10 10:00
6.2.3 Setup Menu
'...' in the title is replaced by 'Zero All',
'Zero&Span All', 'Programmed Sequence'
or 'Blowback All', depending on the selected
procedure.
In lines 1 ... 4, specify date and time for the
next countdown to start.
Shows the time for the next start of procedure,
based on the current settings.
Set start date and time: The next calibration
time is calculated, considering the entries in
above lines and the interval time given on the
previous page.
Note!
This procedure also updates the four lines
above, to show the next calibration date as
start time.

Emerson X-STREAM XE Specifications

General

Brand	Emerson
Model	X-STREAM XE
Category	Measuring Instruments
Language	English