Emerson Process Management GmbH & Co. OHG1-2
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
1 Technical Description
• Pressurized enclosure conforming to
ATEX directive 94/9/EC, for installation
in Zone 2.
• Simplified purge system (Z-purge) for
installation in North American Div 2 envi-
ronments.
The cast aluminium eld housing is designed
to withstand an explosion and intended to be
used in hazardous areas of Zone 1.
More information about analy-
zers for hazardous areas can
be obtained from your Emerson
Process Management sales
ofce.
Note!
These instructions do not detail the installati-
on nor operation of X-STREAM analyzers in
hazardous areas. If you intend to use your
analyzer for such purposes, pay attention
to the separate instruction manuals sup-
plied with analyzers to be used in hazar-
dous areas.
Further features (in parts options):
• Congurable measurement display
• gas values and/or secondary measure-
ments (e. g. ow)
• single or dual pages
• Congurable measurement units
• supports conversion factors from ppm
to several other, even user specic units
• 3 independent software access levels
• protection against unauthorized chan-
ging of congurations
• password protected
• to be separately activated
• Unattended zero and span calibrations
• calibrations without user interaction
• Communication via serial and Ethernet
interface
• remotely control the analyzer
• Web browser interface
• remote control and monitoring via stan-
dard web browser
• Realtime clock
• Synchronizing with internet time server
• enables time controlled calibration
• Data logger with individually congurable
parameters
• measuring values protocols, e.g. for
quality or process monitoring and control
• Event protocol with congurable events list
• remote analyzer status monitoring
• Logfile sizes only limited by available
space on an internal SD card
• up to 2 GB enable logging periods up
to 1 year
• SD card replacable (not by operator, due
to internal use by the analyzer rmware)