Emerson X-STREAM XE - Page 322

Emerson Process Management GmbH & Co. OHG7-34
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
Advanced calibration 1of2
Cancel!
Zero&span single..
Zero all!
Span all!
Zero&span all!
Programmed sequence!
Blowback!

7.4.3 Advanced Calibration
7.4.3.6 Blowback
From ADVANCED CALIBRATION you may
also start a blowback procedure:
Press
enter in this line to .
While the procedure is active, a "Function
executing" message appears.