Emerson X-STREAM XE - Page 359

Emerson Process Management GmbH & Co. OHG 7-71
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
7
Maintenance & Procedures
7.8.4.2 USB Backup - Restore
7.8 Save / Restore Conguration Data Sets
Starting from the MEASUREMENT SCREEN,
press
down to open the MAIN MENU, enter
SETUP and next SAVE-LOAD.. .
In this line press
enter.
Note!
Take care to have an USB device connected
to the analyzer´s USB port (icon to be visible
in the rst menu line)!
A screen appears to conrm the operation:
Select Yes! and press enter to start the pro-
cess.
Enter this submenu.
If system is setup accordingly, access level 3
code must be entered to gain access to this
menu.
Save-Load
Local backup..
Factory defaults..
USB backup..
Setup..
Save-Load..
USB backup
Save..
Restore..
Undo restore!
Busy 0
Progress 1000
Restore cong from USB stick!
This will restart device!
Are you sure?
No!
Yes!