CG Drives & Automation 01-7318-01r1 Functional description 85
Fig. 69
Fig. 70 Normal full-scale configuration
Fig. 71 2–10 V/4–20 mA (Live Zero)
AnIn1 Advanced [513]
AnIn1 Min [5131]
Parameter to set the minimum value of the external
reference signal. Only visible if [512] = User mA/V.
AnIn1 Max [5132]
Parameter to set the maximum value of the external
reference signal. Only visible if [512] = User mA/V.
0–10V 4
Normal full voltage scale configuration of
the input that controls the full range for the
input signal. See Fig. 80.
2–10V 5
The voltage input has a fixed threshold
(Live Zero) of 2 V and controls the full
range for the input signal. See Fig. 81.
User V 6
The scale of the voltage controlled input,
that controls the full range for the input
signal. Can be defined by the advanced
AnIn Min and AnIn Max menus.
User Bipol
V
7
Sets the input for a bipolar voltage input,
where the scale controls the range for the
input signal. Scale can be defined in
advanced menu AnIn Bipol.
NOTE:
Always check the needed set up when the setting of
S1 is changed; selection will not adapt automatically.
20 mA
100 %
100 %
n
(NG_06-F21)
10 V
0
-10 V
20mA
100 %
n
(NG_06-F21)
0
10 V
NOTE:
The different menus will automatically be set to either
“mA” or “V”, based on the selection in AnIn 1 Setup
[512].
Default: 4 mA
Range:
0.00–20.00 mA
0–10.00 V
Default: 20 mA
Range:
0.00–20.00 mA
0–10.00 V
To Next Page
Loading...
Need help?
General