Emotron FDU48-210 User Manual

Emotron AB 01-3694-01r2 Functional Description 141
Reset Run Time [7311]
Reset the run time counter. The stored information will be
erased and a new registration period will start.
Communication information
Mains time [732]
Displays the total time that the VSD has been connected to
the mains supply. This timer cannot be reset.
Communication information
Energy [733]
Displays the total energy consumption since the last energy
reset [7331] took place.
Communication information
Reset Energy [7331]
Resets the kWh counter. The stored information will be
erased and a new registration period will start.
Communication information
Default: No
No 0
Yes 1
Modbus Instance no/DeviceNet no: 7
Profibus slot/index 0/6
Fieldbus format UInt
Modbus format UInt
NOTE: After reset the setting automatically reverts to
“No”.
Unit: h: m: s (hours: minutes: seconds)
Range: 0h: 0m: 0s–65535h: 59m: 59s
Modbus Instance no/DeviceNet no:
31031 hours
31032 minutes
31033 seconds
Profibus slot/index
121/175
121/176
121/177
Fieldbus format UInt, 1=1h/m/s
Modbus format UInt, 1=1h/m/s
NOTE: At 65535 h: 59 m the counter stops. It will not
revert to 0h: 0m.
7311 Reset RunTm
Stp No
732 Mains Time
Stp h:m:s
Unit: kWh
Range: 0.0–999999kWh
Modbus Instance no/DeviceNet no: 31034
Profibus slot/index 121/178
Fieldbus format Long, 1=1 W
Modbus format EInt
Default: No
Selection: No, Yes
Modbus Instance no/DeviceNet no: 6
Profibus slot/index 0/5
Fieldbus format UInt
Modbus format UInt
NOTE: After reset the setting automatically goes back to
“No”.
733 Energy
Stp kWh
7331 Rst Energy
Stp No

Emotron FDU48-210 Specifications

General

Brand	Emotron
Model	FDU48-210
Category	Servo Drives
Language	English