Emotron FDU48-210 User Manual

76 Functional Description Emotron AB 01-3694-01r2
Communication information
Over temperature [252]
Delay time starts counting when the fault is gone. When the
time delay has elapsed, the alarm will be reset if the function
is active.
Communication information
Overvolt D [253]
Delay time starts counting when the fault is gone. When the
time delay has elapsed, the alarm will be reset if the function
is active
.
Communication information
Overvolt G [254]
Delay time starts counting when the fault is gone When the
time delay has elapsed, the alarm will be reset if the function
is active.
Communication information
Overvolt [255]
Delay time starts counting when the fault is gone. When the
time delay has elapsed, the alarm will be reset if the function
is active.
Communication information
Default: 0 (no Autoreset)
Range: 0–10 attempts
Modbus Instance no/DeviceNet no: 43071
Profibus slot/index 168/230
Fieldbus format UInt
Modbus format UInt
NOTE: An auto reset is delayed by the remaining ramp
time.
Default: Off
Off 0 Off
1–3600 1–3600 1–3600 s
Modbus Instance no/DeviceNet no: 43072
Profibus slot/index 168/231
Fieldbus format Long, 1=1 s
Modbus format EInt
NOTE: An auto reset is delayed by the remaining ramp
time.
Default: Off
Off 0 Off
1–3600 1–3600 1–3600 s
251 No of Trips
Stp 0
A
252 Overtemp
Stp Off
A
253 Overvolt D
Stp Off
A
Modbus Instance no/DeviceNet no: 43075
Profibus slot/index 168/234
Fieldbus format Long, 1=1 s
Modbus format EInt
NOTE: An auto reset is delayed by the remaining ramp
time.
Default: Off
Off 0 Off
1–3600 1–3600 1–3600 s
Modbus Instance no/DeviceNet no: 43076
Profibus slot/index 168/235
Fieldbus format Long, 1=1 s
Modbus format EInt
Default: Off
Off 0 Off
1–3600 1–3600 1–3600 s
Modbus Instance no/DeviceNet no: 43077
Profibus slot/index 168/236
Fieldbus format Long, 1=1 s
Modbus format EInt
254 Overvolt G
Stp Off
A
255 Overvolt
Stp Off
A

Emotron FDU48-210 Specifications

General

Brand	Emotron
Model	FDU48-210
Category	Servo Drives
Language	English