Proline Promass 83 PROFIBUS DP/PA Commissioning
Endress+Hauser 63
“Batching” Quick Setup menu
HOME position → F → MEASURED VARIABLE (A)
MEASURED VARIABLE → O → QUICK SETUP (B)
QUICK SETUP → N → QUICK SETUP BATCHING (1005)
Function No. Function name Setting to be selected ( P )
(to next function with F )
1005 QUICK SETUP BATCHING / DOSING YES
After F is pressed by way of confirmation, the
Quick Setup menu calls up all the subsequent
functions in succession.
▼
!
Note!
Functions with a grey background are configured automatically (by the measuring system itself)
6400 ASSIGN LOW FLOW CUTOFF MASS FLOW
6402 ON-VALUE LOW FLOW CUT OFF See Table on Page 64
6403 OFF-VALUE LOW FLOW CUTOFF 50%
6603 FLOW DAMPING 0 seconds
6404 PRESSURE SHOCK SUPPRESSION 0 seconds
7200 BATCH SELECTOR BATCH #1
7201 BATCH NAME BATCH #1
7202 ASSIGN BATCH VARIABLE MASS
7203 BATCH QUANTITY 0
7204 FIXED
COMPENSATION QUANTITY
0
7205 CORRECTION MODE OFF
7208 BATCH STAGES 1
7209 INPUT FORMAT VALUE INPUT
4700 ASSIGN RELAY BATCH VALVE 1
4780 TERMINAL NUMBER Output (display only)
7220 OPEN VALVE 1 0% or 0 [unit]
7240 MAXIMUM BATCH TIME 0 seconds (= switched off)
7241 MINIMUM BATCH QUANTITY 0
7242 MAXIMUM BATCH QUANTITY 0
2200 ASSIGN (main line) BATCH NAME
2220 ASSIGN (Multiplex main line) OFF
2400 ASSIGN (additional line) BATCH DOWNWARDS
2420 ASSIGN (Multiplex additional line) OFF
2600 ASSIGN (information line) BATCHING KEYS
2620 ASSIGN (Multiplex information line) OFF
▼
Back to the HOME position:
→ Press and hold down Esc key X for longer than three seconds or
→ Repeatedly press and release Esc key X → Exit the function matrix step by step
To Next Page
Loading...
