Entron iPAK2 User Manual

iPAK2 User Guide
2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE iPAK2
WARNING
DO NOT DISASSEMBLE, REPAIR, OR MODIFY THE iPAK2. These actions can cause electric shock and fire.
 Use only as described in this manual. Use only ENTRON recommended accessories and
replacement parts.
 Stop operation if any problems occur. If the equipment is not working as it should, has been
dropped, damaged, left outdoors, or been in contact with water, contact ENTRON.
 Only apply the specified power. Application of a voltage or current beyond the specified range
can cause electric shock or fire.
 Do not use damaged plugs or connecting cables.
 Keep water and water containers away from the iPAK2. Water ingress can cause a short circuit,
electric shock, or fire.
 Do not insert objects into openings. Do not use with any opening blocked; keep free of dust and
debris.
 Do not install the iPAK2 in any of the following environments
o damp environments where humidity is 90% or higher.
o dusty environments.
o environments where chemicals are handled.
o environments near a high-frequency noise source.
o hot or cold environments where temperatures are above 40°C or below 0°C, or
environments where water will condense.

Entron iPAK2 Specifications

General

Brand	Entron
Model	iPAK2
Category	Controller
Language	English