Epson AcuLaser C2800 - Page 341

AcuLaser C2800/C2800D/C3800/C3800D Revision C
DISASSEMBLY/REASSEMBLY Disassembly/Reassembly 341
Confidential
PWBA USB
1. Disconnect the connector (CN2) of the PWBA USB.
2. Remove the two screws (silver, 6 mm) that secure the PWBA USB to the main unit.
3. Remove the PWBA USB from the main unit.
B
Kmy03063EA
1)
2)
2)
3)
PWBA USB
SWITCH POWER
1. Disconnect connector (P/J481) of the SWITCH POWER.
2. Release the tabs of the SWITCH POWER and remove the SWITCH POWER from the main unit.
Mind the correct orientation when installing the SWITCH POWER.
 Match the ON/OFF of the SWITCH POWER with that engraved on the BRACKET SW
E surface.
C
Kmy03070EB
1)
2)-1
2)-1
2)-2
SWITCH POWER