EasyManua.ls Logo

Epson AcuLaser C2800 - Page 83

Epson AcuLaser C2800
459 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING FIP 83
Confidential
OTHER THAN PAPER JAM
Table 3-2. List of Warnings and Errors (Other than paper jam)
Class LCD Message Description See FIP
Warning
Yellow(Y) Toner Low A remaining amount of yellow toner fell to below about 25%. ---
Magenta(M) Toner Low A remaining amount of magenta toner fell to below about 25%. ---
Cyan(C) Toner Low A remaining amount of cyan toner fell to below about 25%. ---
Black(K) Toner Low A remaining amount of black toner fell to below about 25%. ---
Worn Transfer Unit TRANSFER UNIT is approaching the end of its life cycle. ---
Worn Fuser FUSER UNIT has reached the near end of its life cycle. ---
Replace Fuser FUSER UNIT has reached the end of its life cycle. FIP 1-40 (p.114)
Error
Install Yellow(Y) TnrCart IMAGING CARTRIDGE (Y) is not installed, or the one of another color is installed. FIP 1-14 (p.98)
Toner could not be detected when a new IMAGING CARTRIDGE (Y) is installed. FIP 1-41 (p.114)
Install Magenta(M) TnrCart IMAGING CARTRIDGE (M) is not installed, or the one of other color is installed. FIP 1-15 (p.99)
Toner could not be detected when a new IMAGING CARTRIDGE (M) is installed. FIP 1-42 (p.115)
Install Cyan(C) TnrCart IMAGING CARTRIDGE (C) is not installed, or the one of another color is installed. FIP 1-16 (p.99)
Toner could not be detected when a new IMAGING CARTRIDGE (C) is installed. FIP 1-43 (p.115)
Install Black(K) TnrCart IMAGING CARTRIDGE (K) is not installed, or the one of another color is installed. FIP 1-17 (p.100)
Toner could not be detected when a new IMAGING CARTRIDGE (K) is installed. FIP 1-44 (p.116)
Install Transfer Unit TRANSFER UNIT is not installed. FIP 1-18 (p.100)
Wrong TRANSFER UNIT is installed. FIP 1-50 (p.120)
Install Fuser FUSER UNIT is not installed properly, or a broken thermistor inside the FUSER UNIT is detected. FIP 1-19 (p.101)
The CRUM ID inside the FUSER UNIT is not correct. FIP 1-51 (p.120)
TonerCart Error Yellow(Y) Communication error between the CRUM inside the IMAGING CARTRIDGE (Y) and the PWBA MCU. FIP 1-20 (p.101)
TonerCart Error Magenta(M) Communication error between the CRUM inside the IMAGING CARTRIDGE (M) and the PWBA MCU. FIP 1-21 (p.102)
TonerCart Error Cyan(C) Communication error between the CRUM inside the IMAGING CARTRIDGE (C) and the PWBA MCU. FIP 1-22 (p.102)
TonerCart Error Black(K) Communication error between the CRUM inside the IMAGING CARTRIDGE (K) and the PWBA MCU. FIP 1-23 (p.103)
DM Error 002 Communication error between the Duplex Unit and the PWBA MCU. FIP 1-33 (p.110)
Cassette2 Error 001 Communication error between the Option Feeder and the PWBA MCU. FIP 1-34 (p.111)

Table of Contents

Related product manuals