Epson AcuLaser C2800 - Page 88

AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Engine-related Trouble FIP 88
Confidential
FIP 1-2 Paper Jam C1 A
 Possible parts that caused the error
 Troubleshooting
 CLUTCH ASSY PH FEED
 DRIVE ASSY PH
 REGI SENSOR
 ROLL ASSY FEED (Feed Roll)
 ROLL ASSY FEED (Nudger Roll)
 ROLL ASSY FEED (Retard Roll)
 PWBA MCU
Step Check Yes No
1
Check the paper feed path
Is there any foreign material, deformation, or
dirt on the path?
Clean or replace
the part.
Go to Step [2].
2
Check the Paper Feed Rollers
Are the Paper Feed Rollers (Feed Roll/Nudger
Roll/Retard Roll) installed correctly?
Go to Step [3]. Reinstall the
rollers correctly.
3
Check the Paper Feed Rollers
Are the Paper Feed Rollers (Feed Roll/Nudger
Roll/Retard Roll) worn?
Replace the
rollers.
Go to Step [4].
4
Check the operation of the REGI SENSOR
Check the REGI SENSOR with reference to
FIP 2-1 (p.121). Was the trouble fixed?
End of procedure Go to Step [5].
5
Check the operation of the CLUTCH ASSY
PH FEED
Check the CLUTCH ASSY PH FEED with
reference to FIP 2-4 (p.122).
Was the trouble fixed?
End of procedure Go to Step [6].
6
Check the operation of the DRIVE ASSY PH
Check the DRIVE ASSY PH with reference to
FIP 2-6 (p.123).
--- ---