AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Engine-related Trouble FIP 89
Confidential
FIP 1-3 Paper Jam C2 C1 A
Possible parts that caused the error
Troubleshooting
CLUTCH ASSY FEED OPT
CLUTCH ASSY TURN OPT
DRIVE ASSY OPT FDR
ROLL ASSY FEED (Feed Roll)
ROLL ASSY FEED (Nudger Roll)
ROLL ASSY FEED (Retard Roll)
PWBA FEED-H
REGI SENSOR
PWBA MCU
Step Check Yes No
1
Check the paper feed path
Is there any foreign material, deformation, or
dirt on the path?
Clean or replace
the part.
Go to Step [2].
2
Check the Paper Feed Rollers
Are the Paper Feed Rollers (Feed Roll/Nudger
Roll/Retard Roll) installed correctly?
Go to Step [3]. Reinstall the
rollers correctly.
3
Check the Paper Feed Rollers
Are the paper feed rollers (Feed Roll/Nudger
Roll/Retard Roll) worn?
Replace the
rollers.
Go to Step [4].
4
Check the operation of the REGI SENSOR
Check the REGI SENSOR with reference to
FIP 2-1 (p.121). Was the trouble fixed?
End of procedure Go to Step [5].
5
Check the operation of the CLUTCH ASSY
FEED OPT (550 PAPER FEEDER)
Check the CLUTCH ASSY FEED OPT with
reference to FIP 2-13 (p.128).
Was the trouble fixed?
End of procedure Go to Step [6].
Step Check Yes No
6
Check the operation of the CLUTCH ASSY
TURN OPT (550 PAPER FEEDER)
Check the CLUTCH ASSY TURN OPT with
reference to FIP 2-12 (p.127).
Was the trouble fixed?
End of procedure Go to Step [7].
7
Check the operation of the DRIVE ASSY
OPT FDR
Check the DRIVE ASSY OPT FDR with
reference to FIP 2-14 (p.129).
--- ---
To Next Page
Loading...
