Epson AcuLaser C2800 - Page 93

AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Engine-related Trouble FIP 93
Confidential
FIP 1-7 Paper Jam A B
 Possible parts that caused the error
 Troubleshooting
 DRIVE ASSY MAIN
 FUSER UNIT
 PWBA MCU
Step Check Yes No
1
Check the paper feed path
Is there any foreign material, deformation, or
dirt on the path?
Clean or replace
the part.
Go to Step [2].
2
Check the operation of the Exit Clutch in the
DRIVE ASSY MAIN
Check the Exit Clutch in the DRIVE ASSY
MAIN with reference to FIP 2-10 (p.125).
Was the trouble fixed?
End of procedure Go to Step [3].
3
Check the operation of the Exit Sensor in the
FUSER UNIT
Check the Exit Sensor in the FUSER UNIT with
reference to FIP 2-11 (p.126).
--- ---