Epson AcuLaser C2800 - Page 94

AcuLaser C2800/C2800D/C3800/C3800D Revision C
TROUBLESHOOTING Engine-related Trouble FIP 94
Confidential
FIP 1-8 Paper Jam A D
 Possible parts that caused the error
 Troubleshooting
 CLUTCH DUP
 MOTOR ASSY DUP
 ROLL ASSY DUP1
 ROLL ASSY DUP2
 ROLL ASSY TURN
 CLUTCH ASSY PH TURN
 DRIVE ASSY PH
 REGI SENSOR
 PWBA DUP
 PWBA MCU
Step Check Yes No
1
Check the paper feed path
Is there any foreign material, deformation, or
dirt on the path?
Clean or replace
the part.
Go to Step [2].
2
Check the Paper Feed Rollers
Are the Paper Feed Rollers (ROLL REGI
RUBBER/ROLL REGI METAL) installed
correctly?
Go to Step [3]. Reinstall the
rollers correctly.
3
Check the Paper Feed Rollers
Are the paper feed rollers (ROLL REGI
RUBBER/ROLL REGI METAL) worn?
Replace the
rollers.
Go to Step [4].
4
Check the operation of the CLUTCH DUP
Check the CLUTCH DUP with reference to
FIP 2-16 (p.131). Was the trouble fixed?
End of procedure Go to Step [5].
5
Check the operation of the MOTOR ASSY
DUP
Check the MOTOR ASSY DUP with reference
to FIP 2-17 (p.132). Was the trouble fixed?
End of procedure Go to Step [6].
6
Check the operation of the CLUTCH ASSY
PH TURN
Check the CLUTCH ASSY PH TURN with
reference to FIP 2-3 (p.122).
Was the trouble fixed?
End of procedure Go to Step [7].
Step Check Yes No
7
Check the operation of the DRIVE ASSY PH
Check the DRIVE ASSY PH with reference to
FIP 2-6 (p.123). Was the trouble fixed?
End of procedure Go to Step [8].
8
Check the operation of the REGI SENSOR
Check the REGI SENSOR with reference to
FIP 2-1 (p.121).
--- ---