Using Options
213
7
7
7
7
7
7
7
7
7
7
7
7
1. Make sure the printer is not turned on, and unplug the power
cord if it is plugged into an electrical outlet.
2. Lock all the casters at the bottom of the unit.
w
Warning:
You should lock all casters before installing the unit on the
printer. Otherwise, the unit may move and cause an accident.
c
Caution:
You should remove the face-up tray located on the left side of
the printer and fold up the MP tray located on the right side
of the printer during the installation procedure. Otherwise,
you may damage the trays.
3. Lift the printer up.
To Next Page
Loading...
