324
Troubleshooting
If you do not want to print this job in manual mode, press the
Start/Stop button
. The printer feeds paper from the specified
paper source.
For details on the manual feed mode, see “Manually feeding
paper”.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the
Start/Stop button
on the control panel to resume
printing. Or press the Job Cancel button to cancel the print job.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the EPSON WinAssist or WebAssist utility.
Refer to the Administrator’sGuidefor information.
Need Memory
The printer has insufficient memory to complete the current print
job. Cancel printing by deleting it from the print queue on your
computer, or by pressing the Job Cancel button on the printer.
To clear this error message, select
Clear Warning
from the control
panel’s Reset Menu. See “How to access the control panel menus”
on page 167 for instructions.
To prevent this problem from happening again, add more
memory to your printer as described in “Memory module” on
page 351.
Offline
The printer is not ready to print. Press the
Start/Stop button
.
To Next Page
Loading...
