3. Pull both paper set levers forward until the paper guides retract
and lock open to allow paper loading.
4. Take a stack of paper (up to 50 sheets) and fan it. Next, tap the
side and bottom edges of the paper on a flat surface to even
up the stack.
5. Insert the paper stack printable side down along the left paper
guide.
6. Adjust the right paper guide so that it matches your paper’s
width. Make sure the position of the guide allows the paper
to move up and down freely.
G4-8-1
G4-8
4
Gentian Rev.c
A5 size Chapter 4
97/06/20 pass 0
Printing on Single Sheets
4-9
To Next Page
Loading...
