Epson LX-300 Service Manual

LX-3(M Service Manual
Ptvduct Lkacription
1.2.2 Firmware Specifications
Control codes:
EsC/r
Input data buffer:
4KB
Character sets:
13 international character sets
Character tables:
See the table below.
Table 1-12. Character Tables
Character Table
Standard Model
NLSP* Model
ITALIC
o
0
PC437 (US, Standard Europe)
o
0
PC850 (Multilingual)
o
0
PC860 (Portuguese)
o
x
PC861 (Icelandic)
o x
PC863 (Canadian-French) o
x
PC865 (Norwegian) o
x
BRASCII o x
Abicomp
o
x
PC852 (East Europe) x
o
PC853 (Turkish)
x
o
PC855 (Cyriliic)
x o
PC857 (Turkish)
x
o
PC866 (Russian)
x
o
PC869 (Greek) x
o
PC437 Greek x
o
ISO Latin IT (Turkish) x
o
ISO 8859-7 (Greek)
x
o
Code MJK (Czecho, Slovakia) x
o
MAZOWIA (Polland)
x
o
Bulgaria (Bulgaria)
x
o
0
Suppofted
X Not supported
*
N~P= National Language Support
Bitmap fonts:
LS
EPSON NLQ Roman
EPSON
NLQ Saris Serif
EPSON DRAIT
Character size
10.5 points
Character matrix
Draft 10
cpi; 11 horizontal dots, 9 vertid dots
NLQ 10 cpi; 23 horizontal dots, 18 vertical dots
Print mode
Draft mode:
Double-width
Double-strike
Super/subscript
NLQ mode:
Double-width
Italics
Printing speed:
See Table 1-13.
Printable columns:
See Table 1-13.
Condensed Emphasized
Underlined Italics
Emphasized
Underlined
Super/subscript
Rev. A
1-9

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%