Epson LX-300 Service Manual

Product Description
LX-W) Service Mhnual
Table 1-13. Printing Speed
Ch~m&:er
Printable
Maximum Print Speed [cps]
Printing Mode
Columns
Monochrome Color
Draft
10 cpi
80
220 (165) 165 (1 65)
Draft
12 cpi
96
264 (198) 198 (198)
Draft condensed
17.1 cpi
137
188 (141)
Draft condensed
20 cpi
160 220 (165)
Draft emphasized
10 cpi 80
110 (83)
Draft double width
5 cpi
40
110 (83)
NLQ
10 cpi
80
44 (33)
NLQ
12 cpi 96
53 (40)
NLQ double width
5 cpi 40 22 (16)
Notes: Data in parentheses indicates the speed on a line containing at least one of the following:
- A line containing a userdefined character.
- A
linecontaining oneofthe50 characters corresponding tohexcodes BO to DFand F4
and F5.
- A line that is printing when printhead driving voltage drops from over-duty printing.
(When voltage drops below the lower limit, the printer stops printing in the middle of
the line, and then prints the rest of the line at a slower speed.)
Table 1-14. Resolution
Printing Mode
Horizontal Density
Vertical Density Adjaoent Dot Print
Draft
120 dpi
72 dpi
No
Draft condensed
240 dpi
72 dpi
No
Draft emphasized
120 dpi
72 dpi
Yes
NLQ
240 dpi
144 dpi
No
60 dpi
72 dpi
Yss
72 dpi
72 dpi
Yes
80 dpi
72 dpi
Yes
Bit image
90 dpi
72 dpi
Yes
120 dpi
72 dpi Yes
120 dpi
72 dpi
No
240 dpi
72 dpi
No
(
.
‘x:
i ,:’
~.:?”;,
‘---
1-10
Rev. A

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%