Maintenance 9. Troubleshooting
Restore the controller configuration.
1121
File failure.
Rebuild the project.
1122
File failure.
Point file is corrupt.
Rebuild the project.
1123
File failure.
I/O label file is corrupt.
Rebuild the project.
1124
File failure.
User error file is corrupt.
Rebuild the project.
1125
File failure.
Error message file is corrupt.
Software option information is
File failure.
Vision file is corrupt.
Rebuild the project.
1128
File failure.
Backup information file is corrupt.
1130
Error message failure.
No item is found in the error history.
1131 Cannot access the USB memory.
Insert the USB memory properly. When
this error still occurs after the USB
memory is inserted properly, the
memory may be unrecognizable to
controller. Insert another memory to
check the operation.
File failure.
Failed to copy the file.
Failed to delete the file.
GUI Builder file is corrupt.
Rebuild the project.
1135
File failure.
The name of Playback is invalid.
File failure.
Failed to open the object file.
Failed to open the project file.
Failed to read the project file.
Failed to open the condition save file.
File failure.
Failed to write the condition save file.
File failure.
Failed to open the conveyor file.
Failed to read the conveyor file.
Error history is invalid.
File failure.
Failed to map the error history.
File failure.
Failed to open the error history file.
RC90 (EPSON RC+ 7.0) Rev.4
121