Epson RC90 User Manual

Maintenance 9. Troubleshooting
No.
Message
Remedy
Note 1
Note 2
1559
Communication failure.
Failed to allocate memory
-
1580
Parser communication failure.
Communication error.
-
1581
Parser communication failure.
Time-out occurred during
communication.
-
1582
Parser communication failure.
Transmission error.
-
1583
Parser communication failure.
Initialization error.
-
1584
Parser communication failure.
Connection error.
-
1585
Parser communication failure.
Invalid parameter
-
1586
Parser communication failure.
Busy
-
1587
Parser communication failure.
Received an invalid data
-
1700
Initialization failure.
Failed to initialize TP.
1701
Initialization failure.
Failed to initialize TP.
1702
Initialization failure.
Failed to initialize TP.
1703
File failure.
Failed to read the screen data file.
1704 Failed to read the setting file.
1706 Failed to open the TP port.
1708 Failed to read the key table for TP.
1709 Failed to change the language.
1710 Failed to display the screen.
1800
The controller is already connected to
a RC+.
Only one RC+ 7.0 can be connected to
the controller.
1802
The command was attempted without
being connected to a controller.
1803
Failed to read or write the file on the
PC.
1804
Initialization failure.
Failed to allocate memory on the PC.
1805
Connection failure.
Check the controller startup and
connection of the communication
cable.
1806
Timeout during connection via
Ethernet.
1807 Timeout during connection via USB.
1808 USB driver is not installed.
Failed to install EPSON RC+ 7
.0.
Install EPSON RC+ 7.0 again.
1809
Initialization failure.
Failed to initialize PC daemon.
1810
PC daemon error.
Uncommon error.
RC90 (EPSON RC+ 7.0) Rev.4
125

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English